Cut to Length Shearing Line

Rollcon Engg. Co. has a wide range of designs for Cut-to-length lines to suit the exact needs of the customer. With a reference of many lines with a width range of 450mm to 1500mm and thickness range of 0.12mm to 10.0mm of ferrous and non-ferrous material.

Roll Feed Lines :
Normally used for high quality requirements of sheets for Automotives and white goods, in these lines, the precision leveller runs continuously at a constant speed and pushes the material in a loop. A low inertia Feed Roll pulls the material out of the loop at high speed and stops at the exact required length, ensuring accurate cut lengths. Length accuracy of ±0.05mm and diagonal accuracy of ±0.5mm can be achieved, depending on the selection of electrical controls. These lines can cut sheets at the rate upto 40 cuts/minute and speeds upto 80mpm.

Start-Stop Lines/Hump Type Lines:
These lines are the ideal choice for customers who do not require the high production rates associated with Roll Feed Lines and want to process heavier gauge, non-surface critical materials.In these lines, the leveller/flattener works in a start-stop or run & crawl mode. Strips upto 10mm thick and 2000mm wide can be processed on such lines.

Rotory Shearing Lines :
These are used for thinner strips at fast speeds. Typical application is Galvanised and/or colour coated strips for roofing materials. The precision leveller runs at a constant speed. The shear blades are mounted on two eccentrics geared together and activated automatically to match the sheet speed at the exact length for shearing. Speeds upto 100mpm can be attained on such lines.

Cut To Length Lines Manufacturers exporters, Tension Levelling Lines,Cut To Length Lines Suppliers,Tension Levelling 
Lines Manufacturer India Precision Levellers    
  Rollcon Engg. Co. offers 4High, 5High and 6High multi-roll precision levellers suitable for strip thicknesses as low as 0.10mm and as high as 6.0mm. Built to high precision, these levellers are designed to be adjusted "on the fly" or "as you level". A number of adjustable back up roll banks ensure high quality of levelling. Quick change cassette type models are also available to increase the range of strip thickness in the same line.   Cut To Length Lines Manufacturers exporters, Tension Levelling Lines,Cut To Length Lines Suppliers,Tension Levelling 
Lines Manufacturer India


     
Cut To Length Lines Manufacturers exporters, Tension Levelling Lines,Cut To Length Lines Suppliers,Tension Levelling 
Lines Manufacturer India Tail Out Function :  
  Automatic tail out function is provided to monitor operations of the entire line to enable unaided and damage free cutting upto the last possible full length sheet after the tail-out of the coil from the uncoiler.  
     
Cut To Length Lines Manufacturers exporters, Tension Levelling Lines,Cut To Length Lines Suppliers,Tension Levelling 
Lines Manufacturer India Stacking Systems :  
  Rollcon Engg. Co offer air cushion type or drop type or combination air-drop type stackers. End discharge or side discharge systems coupled with extra features of stack storage, weighment and conveying can also be provided. Multiple stackers can be also be provided to eliminate stack change-over time for higher productivity.